To commemorate the US launch of Odenkan Paint, we worked with Odenkan to produce the limited-run MG Wing Gundam Zero EW Ver.Ka (Newtype Coating).
Odenkan applied a glossy metallic finish on this popular kit using their proprietary plating tech, typically reserved for chrome cosmetics. The result is a visually striking yet durable finish. Due to this labor-intensive manual process, the run was limited to 150 kits.
Includes:
- Twin Buster Rifle x1
- Beam Saber x2
- Shield x1
- Pedestal x1
- Foil Sticker x1
- Water Transfer Decal x1
Tips & Advice before you build from Team Newtype:
General:
The fitting of the base kit is very tight even before the chrome finish, so some pegs just do not go in, especially in the chest. Stripping connector pegs is pretty necessary (via sanding sponge or hobby knife) when the connection is tight.
Head:
For the head, there were already fitting issues w/ the base kit. The most common problem is that the chin doesn't push through all the way, so stripping the connectors of the chin is necessary (be careful not to damage the chin itself though!). Another issue is the ear gimmick this kit comes with. It's a really small peg with a thin hinge. It's very important to strip the peg of the moving ear piece.
For the head, there were already fitting issues w/ the base kit. The most common problem is that the chin doesn't push through all the way, so stripping the connectors of the chin is necessary (be careful not to damage the chin itself though!). Another issue is the ear gimmick this kit comes with. It's a really small peg with a thin hinge. It's very important to strip the peg of the moving ear piece.
Hands:
The hands on this kit are white, which means they are also plated. The ball joints require a good amount of stripping/sanding so that the plastic does not stress or fracture from the friction between the wrist connection point and the ball joint.
The hands on this kit are white, which means they are also plated. The ball joints require a good amount of stripping/sanding so that the plastic does not stress or fracture from the friction between the wrist connection point and the ball joint.
Most problems can be solved by stripping the plated connector peg(s) via sanding sponge of hobby knife.
This product has been discontinued. Once we've sold out, we will not be restocking.
Nubtrition Facts
Servings Per Container 1
Serving Size1361g
| Scale | 1/100 |
| Line | MG - Master Grade |
| Brand | Gundam |
| Series | Gundam Wing: Endless Waltz |
| SKU | ODKN-WING |
Glue
Paint
Tools
![Image of Delpi Decal MG Sazabi - [White & Gold Part HOLO]](https://cdn.shopify.com/s/files/1/2786/5582/files/MGSazabiWGPartHolo_300x300.png)
Customers Also Bought
Builds
Questions
Question
can i use the raser kit to sand down the peg
Answer
Yes.
April 18, 2023
Question
Is this the 2020 ver.ka, or the 2004 one?
Answer
This is the 2020 Ver. Ka.
August 9, 2022
Question
Is this an entire model kit, or an add on for the MG Vet.Ka?
Answer
It’s the kit but electroplated.
July 31, 2022
yes. full model kit to build with a special coating.
July 31, 2022
Question
Are the inner frame and weapon runners painted to give a metal appearance or are the only runners that are painted the armor/wing runners?
Answer
Its only the armor/wing/weapon runners that are electroplated the inner frame is still the same color as most inner frames
May 11, 2022
Question
so it the whole kit but it just painted?
Answer
Yes, the runners are plated.
May 19, 2022
Reviews
No reviews, be the first to submit your review.