This is a softening agent for slidemarks. It has the effect of closely adhering slidemarks to curved surfaces.
【Method of use】
・ First, apply a quick drop to the area where the decal will go using the brush attached to the cap.
・ Apply decal over it.・ Apply gentle pressure to the decal with a soft cloth, removing any excessive liquid and sticking the decal down fast.
・ The decal will stick perfectly, even on uneven or curved surfaces.
・ If air gets in between the decal and the model surface, after drying delicately prick the decal with a needle and insert Mr.MARK SOFTER through the resulting hole. The air will escape, and the decal will stick down firmly.
【Method of use】
・ First, apply a quick drop to the area where the decal will go using the brush attached to the cap.
・ Apply decal over it.・ Apply gentle pressure to the decal with a soft cloth, removing any excessive liquid and sticking the decal down fast.
・ The decal will stick perfectly, even on uneven or curved surfaces.
・ If air gets in between the decal and the model surface, after drying delicately prick the decal with a needle and insert Mr.MARK SOFTER through the resulting hole. The air will escape, and the decal will stick down firmly.
This item is limited to 3 per person.
| SKU | GNZ-MS231 |
Customers Also Bought
Builds
Questions
Question
do you use this before or after you apply the decal
Answer
According to the description it goes before. Mark setter is the one you use after
Irex
January 28, 2024after
o
January 26, 2024Question
is this a must need for water slide, or just the Mr. Mark Setter MS232 is fine
Answer
It depends. On curved or irregular (bumps/voids or large angle changes) surfaces, Softer helps the decal to contour to the surface and create a smooth finish. On smooth surfaces, it can reduce silvering but is not strictly necessary.
ZeonicTitan
September 18, 2024Reviews
4.9
8 Reviews
5 stars
7
4 stars
1
3 stars
0
2 stars
0
1 star
0
Oct 17, 2025
Arrived in perfect...
Arrived in perfect condition.
Review by
Aaron
- Verified Purchaser
Dec 31, 2023
It was wrapped separately...
It was wrapped separately from everything else which is always good when it’s liquids/glass bottles. Mine was slightly opened but thankfully very little leaked out. Could’ve been better but it could’ve been much worse.
Review by
Agenda
- Verified Purchaser
Nov 18, 2023
Works better than...
Works better than expected.
Review by
Edmundo
- Verified Purchaser
Apr 8, 2023
Great product, gets the...
Great product, gets the job done
Review by
Mathew
- Verified Purchaser
Feb 21, 2023
Worked as intended, very...
Worked as intended, very useful
Review by
GATX-207
- Verified Purchaser