Water based(acrylic) clear coating paint comes in. The really soft and translucent gloss coat finishes base color deeper.
It protects complished work from scratches with its tough coating film. Of course, it will not ruin painted Mr.COLOR, ACRYSION, and AQUEOUS HOBBY COLOR as well as conventional product.
It protects complished work from scratches with its tough coating film. Of course, it will not ruin painted Mr.COLOR, ACRYSION, and AQUEOUS HOBBY COLOR as well as conventional product.
SKU: GNZ-B603
Customers Also Bought
Builds
Photos
Questions
Question
is this good to use over decals with unpainted kits?
Answer
Yes, this is great to use over decals/unpainted parts if you desire a matte finish.
April 18, 2022
Question
If I use this topcoat on a Gundam kit with my panel lines filled with Tamiya panel line accent, will it make the panel lines bleed
Answer
As long as your panel lines are dry, this should not make them bleed or run.
August 5, 2022
Question
Is this toxic?
Answer
Any paint is toxic when aerosolized. Please use a proper mask/respirator when painting.
August 11, 2022
yea buddy, spray outside or use a respirator.
August 12, 2022
Question
How to dispose of this? Is it okay if I just throw it in the regular trash?
Answer
depends on your local trash regulations.
September 25, 2022
Question
How long will one can last? Is one enough for a MG kit?
Answer
Typically (depending on use), these cans will last around 4-5 MG's worth when coated thoroughly.
April 18, 2023
Question
How long does this take to dry
Answer
I'd say a day or if you live in a good climate area a couple of hours but just to be safe a day.
January 7, 2023
This dries quickly but takes time to cure. It’ll be dry to the touch within half an hour or so. To fully cure, it needs about a full day.
January 8, 2023
Question
When is topcoat restock
Answer
Unfortunately, that is difficult to predict due to the manufacturer's reprint schedule. We suggest adding the item to your wishlist to receive a notification for any restocks!
May 22, 2023
Question
Would this top coat damage abs parts
Answer
It shouldn't, as far as I know.
September 6, 2024
Reviews
5.0
2
Reviews
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 star
0
100%
of customers recommend this product
Sep 6, 2025
Really Forgiving!
I didn't really wanna use my airbrush so I got this and it was perfect. Even though I suck with rattle cans and got some pooling (specially around the legs), I just let it be and it turned out looking great! I can only imagine how it'd be with someone who is better than me lol. The spray nozzle was good and I feel like it'll survive spraying quite a few 1/144 kits but take that from me with a grain of salt. For anyone new, my advice is don't get impatient and really pay attention to the distance between your part and the spray.
Recommends this
product
Review by
- Verified Purchaser
Jun 23, 2022
Best top coat ever
this is the first topcoat I've ever used and even for a beginner is really friendly even if you put a lot of it on one part, just make sure you don't spray too close to the piece and you're golden!
Recommends this
product
Review by
- Verified Purchaser
Information
Mode
© Newtype LLC 2025 All Rights Reserved