“MASKING SOL”, which can be applied, cut and peeled off. This is product has the same characteristics as M131, which is no longer manufactured.
Mr.Masking Sol R contains a new formulation which can be readily applied, cut, and removed after use.
*Apply MASKING SOL where you need it evenly with a brush.
*After it dries within 20~30min., it becomes translucent film.
*Cut unnecessary parts away neatly with a design knife, etc. leaving masked parts, and then apply paint.
*When the paint has dried completely after painting, peel off MASKING SOL.
*MASKING SOL is water soluble, so wash out brushes with water. This is a water-soluble product, so when it thickens during usage, you can thin it out with tap water for extended use.
Tap heart for stock notification.
SKU: GNZ-M133
Builds
Photos
Questions
No questions.
Reviews
5.0
1
Review
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 star
0
100%
of customers recommend this product
May 20, 2024
BEWARE THE CORNERS
So, off the bat. it's amazing. But here's somet good to know bits before you buy.
1. Apply thick. Reality is,, its better to go thick than thin, thick makes it much easier to cut with a sharp blade without perforating the film. also yeah uses sharpblades only. If you put it to your hand and it leaves a skin mark, its good enough.
2. WATCH OUT FOR SEAMS. the biggest enemy to this is seams and tight spots. because when it solidifies and you remove it to clean it out, it loves to get trapped in seams, and like plastic wrapping lodged in a tight spot, it does not come out easily.
3. Use tweezers, knives, and blu-tack alternatively works in place of tweezers.
Overall:
9/10. would be perfect if not for the issues with seams and having to go really thick sometimes.
Recommends this
product
Review by
- Verified Purchaser
Information
Mode
© Newtype LLC 2024 All Rights Reserved