1. These primers provide a consistent base color; improves lacquer paint adhesion; helps show paint’s actual tone; reveals any imperfections; and levels minor scratches.

2. Apply 1-2 coats at 18 psi (1.2 bar) until the desired coverage is achieved.

3. Requires mixing of 1 part paint and 2 parts thinner (1:2 ratio) for 0.5mm airbrushes. For 0.3mm airbrushes, add additional thinner to improve flow and consistency.

4. Mix with colors to create colored primers!

SP-S01 PVC Primer user guide:

1. This primer is suitable for PVC, PP, and other plastic primers, which can greatly improve the adhesion of the pigmented paint.

2. No need to dilute, just spray a layer of wet spray directly, and then start to color after drying.

3. It is recommended to use 1.2kg (or more) of spray air pressure, and use it in a well-ventilated place.

4. The preset dilution ratio is 0.5 airbrushes, such as 0.3 airbrushes (or below) It is recommended to add diluent (SC-03) as appropriate to improve the smoothness of spraying.

Directions:

1. Shake well and use in a well-ventilated area.

2. PVC primer is suitable for PVC, PP, and other soft plastics.

3. Apply 1 wet coat at 18 psi (1.2 bar).

4. Our PVC Primer is pre-thinned for 0.5mm airbrushes. For 0.3mm airbrushes, add additional thinner to improve flow and consistency.

This product has been discontinued. Once we've sold out, we will not be restocking.