Geerep is gateless,
so there is no need to cut it out!
0.3mm thick! Precision Made in Japan
GATE LESS ETCHING PARTS=GLEP
Gierep is a general-purpose etching part for detail improvement.
Since there is no gate, there is no need to worry about distortion when cutting out parts! It is in the bag with the
etched parts
sandwiched between the protective sheet and the lower sheet .
Peel off the protective sheet and take it out with tweezers.
(If it is difficult to take out, press it with your finger or a toothpick from the back side for a while.) The
etched parts are glued with an instant adhesive before use.
*Although it is called a gate, a bridge is a common name in etching.
Since there is no gate, there is no need to worry about distortion when cutting out parts! It is in the bag with the
etched parts
sandwiched between the protective sheet and the lower sheet .
Peel off the protective sheet and take it out with tweezers.
(If it is difficult to take out, press it with your finger or a toothpick from the back side for a while.) The
etched parts are glued with an instant adhesive before use.
*Although it is called a gate, a bridge is a common name in etching.
style
Bezel for Hole
Joint Cover
Flange Ring for OD
Round Protecter for OD
Joint Cover 2
Joint Cover 3
SKU: GLEP-06
Builds
No customer builds.
Photos
Questions
No questions.
Reviews
No reviews, be the first to submit your review.
Information
Mode
© Newtype LLC 2024 All Rights Reserved