It is a BMC magazine holder. (With a protective cap)
Hold feeling is improved, operability improves
■ The overall length of approx. 102 mm
■ Width of about 14mm
※ Cautions on use
· Because BMC Tagane is handmade, there is an error in the size of the handle.
If there is backlash after tightening the metal cap, use cellophane tape on the tagine
※ Cautions on use
· Because BMC Tagane is handmade, there is an error in the size of the handle.
If there is backlash after tightening the metal cap, use cellophane tape on the tagine
Adjust the thickness by winding etc.
Conversely, if it is tight, cut off the projection on the tip or use the inside.
The maximum size of Tagane that can be installed is width: about 5.0mm thickness: about 2.6mm.
Conversely, if it is tight, cut off the projection on the tip or use the inside.
The maximum size of Tagane that can be installed is width: about 5.0mm thickness: about 2.6mm.
・ When removing and reattaching the metal cap, be sure to make it vertical and execute the screwdriver.
If you feel it tight, don't tighten it forcibly, check the vertical and then tighten it.
If you continue to tighten at an angle, the screw threads of the holder are
crushed by the ABS resin and cannot be used.
color
Red
Blue
Yellow
Black
Green
Orange
Pink
This product has been discontinued.
Tap heart for stock notification.
SKU: TH0050
Builds
No customer builds.
Questions
Question
Will these be restocked in the near future?
Answer
Unsure, BMC has stopped exporting out of Japan as of Jan 2022
January 15, 2022
Reviews
No reviews, be the first to submit your review.
Information
Mode
© Newtype LLC 2025 All Rights Reserved