Home
  /   Paints
  /   Primer
Odenkan

SP-S01 PVC Primer 35ml

Paint
$16
In stock

Odenkan Lacquer Paint

35ml container

Made in Taiwan

SP-S01 PVC primer user guide:

1. This primer is suitable for PVC, PP, and other plastic primers, which can greatly improve the adhesion of the pigmented paint.

2. No need to dilute, just spray a layer of wet spray directly, and then start to color after drying.

3. It is recommended to use 1.2kg (or more) of spray air pressure, and use it in a well-ventilated place.

4. The preset dilution ratio is 0.5 airbrushes, such as 0.3 airbrushes (or below) It is recommended to add diluent (SC-03) as appropriate to improve the smoothness of spraying.

Directions:

1. Shake well and use in a well-ventilated area.

2. PVC primer is suitable for PVC, PP, and other soft plastics.

3. Apply 1 wet coat at 18 psi (1.2 bar).

4. Our paint is pre-thinned for 0.5mm airbrushes. For 0.3mm airbrushes, add additional thinner to improve flow and consistency.

SKU: SP-S01-ODKN

Builds

No customer builds.

Photos

Questions

Question
Is this a primer that can go over polycaps in Gundam kits similar to the super hard to acquire Gaianotes Multiprimer?
Answer
You can use SP-S02 for that.
June 15, 2023

Reviews

No reviews, be the first to submit your review.
Socials
Mode
© Newtype LLC 2024 All Rights Reserved