50ml container
KSW100 Black super gloss water-based airbrush paint ready to use
High chemical resistance
Universal gloss base for all Kustom Service metallic alcohol-based paints
KSW100 BLACK super gloss is a water-based ready to spray color for airbrush.
This color is not a primer; it is just a glossy color base.
It must be applied over a black primer if you think to mask your surface because used alone, it hasn't a good adhesion over plastics.
It is extremely shiny when compared to the products commonly present on the market.
It can be used alone as a glossy black finish or as a glossy black base if we want to have a perfect chrome color or if we want to use it as a base for all other metallic paint Kustom Series.
It is not necessary to dilute it because it is ready to use for 0.3mm nozzle airbrush.
Just if necessary, this color can be simply diluted by adding common distilled water (RECOMMEND! use distilled water only! Not other waters or thinners)
It is absolutely not recommended to dilute with our thinners or reducers of other brands. In general is not recommended dilute this paint.
AIRBRUSH
Airbrush with 0.3 nozzle. If a 0.2 is used, color must be dilute to a maximum of 5% but the color loose a part of his glossy power.
Brush: it is not possible use it by brushes.
PRESSURE
Always recommended 2 bar except when working on very small components for which a pressure of 1.5 bar can also be used
DILUTION
Use this color as it is, is not necessary dilute it but if you want dilute not to much than 5% with distilled water.
APPLICATION
First of all never try to dry it with air dryer or airbrush air, let it dry at room temperature for 12 hours.
If we force the dry time by air KSW100 black gloss will lose the shine effect.
We suggest (but it is not obligatory, and the technique may vary according to your experience):
Apply a light coat, wait 5 minutes and apply a first wet coat. After 5 minutes, apply a second wet coat and wait 12 hours for metallic paints applications.
The important thing at the end of the application is to have a mirror-like glossy effect, make many test to have the best result.
DRY TIME
If we want the maximum gloss effect never use air dryer or other air to dry this paint, let it dry alone at room temperature.
If we use air it become satin not gloss and all CHR01 or CHR03 loose their mirror effect.
12 hours for a correct touch free and best resistance to alcohol or other laquer paint
72 hours for a complete dry time.
NOTE: it can resist to laquer but it will lose his shiny effect.