Get this set of STL files to print and build a fully posable ‘Energy Belt’ with a piece of string and wire (optional)!

Features
- Original design for adding details to plastic models and action figures
- Valuable component for kitbashing
- Designed to be 3D printed with resin for delicate details
- Length of the belt can be determined freely
- The belt can be bent naturally and realistically yet the pose can be fixed
- Best fit plastic models and action figures of around 12cm in height
- Can easily be attached to plastic models and action figures by 3mm posts/pegs or 3mm magnets
- The belt in the photos has 20 middle sections and is around 11.5cm in length. The ends are around 1.35cm wide and 0.72cm thick

Items in the Zip file
- STL files for the 3 components of **‘Energy Belt’**, single and multiple objects in the file, with and without supports
- Building instructions in PDF format

3D Printing Setting
- Components are designed to be printed in resin
- Printouts being shown here and in building instructions are printed by Phrozen Mini 8K in 50um layer thickness

Contact Mind_Crafter if you have any inquiries on this set of STL files. Follow us on social media for more sharings and products:
Facebook https://www.facebook.com/3dmindcrafter
MeWe https://mewe.com/p/mind_crafter1
Instagram https://www.instagram.com/mind_crafter_3d/
Twitter https://twitter.com/MindCrafter7

Mindcrafter