Wishlists (0)
No public wishlists yet.
Builds (4)
Reviews (9)
the build itself is great, I honestly didn't expect much of the techniques used. Posability is great, and I love the design soo much! The only caveat is that a lot of the joints start to crack not even a day later. if you want it to last a little longer, I'd advise to sand down the ball joints just a tiny bit on the feet and shoulders, plus the extra shaft joint for the feet to connect to the legs.
so from all the reviews I've seen, this is like, the best kit ever, or at least the best high grade, so when I got it, I was expecting a really good kit. It's got plenty of positives, which includes but isn't limited to an included action base, no stickers needed, no polycaps, amazing detail, and good possibility Now for the downsides.. Yes, I said it, this things has downsides. First off, it's a bit too stiff in my opinion, especially in the legs. Anytime I posed it, I always felt like I was going to break something, or push the plastic over the limit. There's also the possibility, which feels like a double bladed sword because for one, it has good possibility. Ab crunch, knee movement, some nice clavicle joints, etc... Then there's the funnels. The way they can be connected to the gundam is flimsy, and though the way they connect to one another is cool, I have to take like half an hour to put them together. Along with smaller issues like the gun not being secure on the hand, the flimsy blades on the arm, and whatnot, it feels like a good kit that's completely glazed. I'm sorry, I want to like it, but I can't
To start off, the feet of this guy have one part on the front tow armor that's a bit annoying to put in and the wings might get a tad bit repetitive with all the parts, but overall a wonderful build. My favorite part would have to be the hands, where you build them on the runner before clipping out the entire hand. Post build, the kit may have some balancing issues since it's got giant heavy wing,s and for me they didn't feel like they could spread out wide enough but that's hopefully just a pet peeve. Shelf presence, for every PG is massive and it's got decent posing. A good kit to build though there may be better PGs to start out with.
this is the worst kit I've built so far, and it shows. Stickers are the only thing making it looks cool, every limb is limited to a 90 degree or lower bend, and even with all these stickers, there's still gonna be parts where you have to paint. What's even worse is an entry grade of the same gundam has no stickers and all the colors, and while it could have been made and looking at it yeah they're like 8 years apart... Nonetheless it's a god awful kit.
so Hugo was a kit I loved the moment O heard it had hind legs (idk what you call those kinda legs so hind it is) and when I got it, I knew. what others said about it and it sorta is the same. The hind legs not only have little to the middle part so much to do a lot, but also there's a piece on the thigh that outright hides it. Aside from the legs, the arms are great, and I'm obviously gonna use them for kitbashing, and the head is funny, just a lil guy with a helmet bigger than his torso. The inner frame it has (because this is an iron-blooded orphans kit) is good, kinda looks like an EVA unit. Overall good for kitbashing, a tad limited on posing, but a decent kit to yoink off the shelf
okee so I got this a while back and honestly it's a good kit, some of the flaws are just with minor like how you have to do quite a lot to move the mono-eye and the articulation, but my biggest gripe are that one of the vents pop out for some reason randomly and it's annoying to put it back in, but not enough to put this to a fourstar. It's a good, cheap, and awesome kit.
Overall, it's kinda fragile. The arms can pop off, the wrist piece can pop off or swivel around, and my god, the sides of the chest feel like they're meant to be popping out all the time. Aside from all these downsides, it is a fun kit to build, and I'm glad the mono-eye can move, so there's that
this kit is simple, it gets you a portanove in white with chicken legs and the extra stuff it gives you is enough to me mixed and you can come up with some cool results, I even got two armor sets for it, which came out fantastically. now the reason I took it to four stars is because it can be a bit fragile in some areas like the connection to the chest and torso, not to mention their method of thigh swivel. It can get frustrating to posing it, since smol feet but one you got it it'll be worth it. Final downside is the head which has, in my opinion, the bar minimum of movement. Anything else is good.
I got this kit a while ago and ever since then I've had some problems, but let's start positive. The detail is great, the little yellow vents can move, and I'm a sucker for cool articulation with the thighs moving when the knees bend... Okay now for the negatives. The skirt is incredibly loose, and god forbid the shoulders are in place. The hands... GOD I HATE THE HANDS. They're really posable, which again, I love more articulation, but also how they executed it is bad. I remember getting to the hands and soon enough the left one now has only four fingers. Aside from some loose pieces, round stickers that I despise, and the hands (I hate the hand btw), the build is a fun one, but the gundam you're given is a meh. I could see someone able to get through these, but I wasn't as lucky.
Questions (10)
does this include the internal frame?
June 23, 20261 Answer:
Yes.
September 26, 2026
are the legs able to be connected to the RG Zeong without modifications?
March 11, 20261 Answer:
You'll need a custom part. The legs on the Dom have a hole connection and the Zeong's waist has a hole connection. The pegs that fit into these are also different sizes.
March 11, 2026
I'm asking this on this kit because of how recent and popular it is, but how come many of the recent releases on newtype use only the teaser images and not the irl pics of the kit? This is more of a personal gripe, I just like to see what my kit's gonna look like when I get it (somewhat)
January 23, 20261 Answer:
Bandai shifted to using renders instead of prototype/painted kit photos as the official “selling point”. Even on the Bandai Hobby site, it’s 90% CG renders for upcoming kits. When that’s the only “official material” to be used, it’s going to be the same for all the retailers.
January 25, 2026
why is this in the 30 minute missions tab and not 30 minute sisters?
January 21, 2026What kinda legs can be in place with the giant thrusters
January 8, 2026how big is the beg that connects the legs to the torso
January 5, 2026when will my bois return
December 27, 2025bandai's still gonna reprint these kits right?.... RIGHT???????
December 17, 20251 Answer:
The AMAIM line has been discontinued and will not be reprinted or restocked.
December 17, 2025
are there any other kits that are compatible with the legs? If not, what about the waist?
December 9, 20251 Answer:
The legs use a proprietary peg system at the connection between the waist and hip, but the connection at the hip and thighs is a standard PC-116 C-Type socket, which may be compatible with other kits that use the part or ones with similar dimensions in that location or have a peg that's the same size. Additionally, the waist connector is also a PC-116-C peg socket which I believe is the standard size used in the waists of a lot of early HGs (but don't quote me on that). You can look at the instructions on the product page to double check and cross reference with the manual of whatever kit you're looking to combine it with. You can also use the official Bandai manual repository at https://manual.bandai-hobby.net/ for just about every Gundam/30MM kit since 2000 if that helps at all (though it's mostly in Japanese so unless you're fluent you'll need to experiment with the settings to figure out what they do or just brute-force translate the entire page with your web browser).
December 10, 2025
are there any other kits that are compatible with the hands?
November 7, 20251 Answer:
Anything that can fit the hands’ balljoints that connects them to the wrist. Will probably require experimenting to see what fits and what doesn’t.
November 9, 2025
Answers (2)
I'm trying to make a high mobility zaku or gundam. AKA, slapping as many thrusters on it as possible
December 22, 2025aren't we all?
June 17, 2024