- 30ml container
Scale model airbrush acrylic water based primer. Ready to spray for 0,3 or bigger airbrush. Good adhesion over plastics, metals, alloy and lexan. Good elasticity with great resistance. This product can be sanded to remove small powder spots or little imperfection with 2000 mesh or smaller (water or dry sand paper).
MAIN FEATURES
Ready to spray
Water based non toxic product
Good for all surfaces or materials as wood, plastics, metals, alloys, elastic lexan from dynamic models ext.
HOW TO DILUTE THE PRIMER
You can dilute the scale model primer with our water based thinner as you like.
More you dilute it, less will be its adhesion power
CORRECT PRESSURE
Use a pressure between 1 and 2 bar with a common airbrush of 0,3 nozzle.
HOW MANY LAYER MUST BE APPLIED TO HAVE BEST RESULTS?
One or two dry coats, dry time of 10 minutes and 2 medium wet coat every 15 minutes (20 or 30 minutes in cold places or winter time)
We can also accelerate dry time with an heat gun or airbrush cold air.
IS IT GOOD FOR LAQUER AND WATER BASE PAINT?
Kustom Service airbrush scale model primer is good for enamel, lacquer, water based and all type of paint on the market.
The only rule to follow is: MUST BE DRY VERY WELL
Timing at room temperature of 18/20 degrees Celsius
- 30/60 minutes for water base paint
- 4/5 hours for all enamel, lacquer or solvent paint in general.
